|
|
 |
|
 |
| 10/100Mbs iMcV-LIM MediaLinX Modules provide switched media conversion from a 10/100BaseTX network segments to 100BaseFX single mode segments for distances exceeding 80k. |
|
Features and Specifications:
- IEEE 802.3x flow control
- AutoCross for MDI/MDIX
- Features LinkLoss and FiberAlert
- Features Auto Negotiation and Selective Advertising
- Supports Config Control (iMcV-MediaLinX only) *
- Features Link Fault Pass-Through (LFPT)
- Layer 2 packet switching, store and forward operation
- Forwarding rate: 14,881 pps for 10 Mbps; 148,810 pps for 100 Mbps;
1,488,100 pps for 1000 Mbps (Gigabit only)
- Installs in any iMediaChassis or MediaChassis
- Supports Jumbo Frames, up to 1536 MTU
- Supports GUI-Based iView2
- Supports Half- and Full-Duplex operation
Supported Fiber Types:
- 50/125µm or 62.5/125µm multi-mode fiber
9/125µm single-mode fiber
Single-strand fiber
Physical:
Connectors:
- RJ-45 and SC or SFP
- Available for single-strand fiber
- Includes hot-swappable architecture
Standards Compliance:
- IEEE 802.3 10Base-T
- IEEE 802.3u 100Base-TX
802.3u 100Base-FX or SX
Operating Temperature:
- +32º to +122º F (0º to 50º C);
-40° to +185° F (-40° to +85° C) IE-iMcV-MediaLinX;
5% to 95% (non-condensing), 0 - 10,000 ft. altitude
Storage Temperature:
- -13º to +158º F (-25º to +70º C); 5% to 95% (non-condensing), 0 - 10,000 ft. altitude
Power Rating:
Dimensions:
- Standard single-slot chassis module
Shipping Weight:
0.30 lbs (0.11 kg)
|
|
|
|
|
 |
10/100Mbs iMcV-LIM MediaLinX Modules provide switched media conversion from a 10/100BaseTX network segments to 100BaseFX single mode segments for distances exceeding 80k. |
|
|
|
10/100Mbs iMcV-LIM MediaLinX Modules provide switched media conversion from a 10/100BaseTX network segments to 100BaseFX CWDM single mode segments for distances exceeding 80k. |
|
|
|
|
|
|
|
|
